The difficulty in tearing the protective film is a big problem
To solve the problem of the difficulty in tearing the protective film
China·Jixiang Group R&D Center
According to the existing protective films on the market
Conduct extreme environment simulation tests
Chemical resistance tests and adhesion experiments
Through the testing of the protective film
Use a new rubber self-adhesive film
As our China·Jixiang Group
The protective film of the metal composite panel
The advantages of rubber self-adhesive film mainly include the following aspects:
1. High transparency and no offset printing:
The self-adhesive film has high transparency, will not leave offset printing, and can maintain the beauty of the product surface.
2. Good tensile strength and puncture resistance:
The self-adhesive film has good tensile strength and elongation at break, can withstand certain stretching and puncture, and protect the product from damage.
3. Environmental adaptability:
The self-adhesive film is not affected by moisture and temperature changes, can maintain the glossiness of the product surface, and after the film is applied, the stacking of products will not cause damage to the self-adhesive film or scratches on the product surface.
4. Easy to tear off and no residual glue:
The self-adhesive film will not leave residual glue after tearing off, and is easy to handle and clean.
Positive effects of protective film
1. Physical protection:
Anti-scratch: The surface of the aluminum-plastic panel (especially the coating or fluorocarbon film) is easily damaged by friction and collision during processing, transportation or installation. The protective film can reduce mechanical damage. Anti-pollution: Prevent dust, glue stains, oil stains, etc. from adhering, keep the surface clean, and reduce the cost of later cleaning.
2. Convenient construction:
· Some protective films are designed with grids or marking lines to facilitate alignment and cutting during installation, and improve construction accuracy.
3. Short-term anti-corrosion:
In a humid environment, the protective film can isolate the erosion of the edge or cut of the aluminum-plastic panel by moisture, salt spray, etc.
Post time: May-09-2025